Tundish Nozzle

Tandish nozzles are widely used today to control the flow of melt exit from the Tandish into the continuous casting mold (CCM). These nozzles can be classified based on different factors such as material, size, and appearance geometry. In terms of the material of the body, such as alumina, full zirconia, alumina-carbon, or alumina-zirconia, they are also produced with inserts with different percentages of zirconia.

  • نازل تاندیش، تاندیش استکانی، تاندیش مونتاژی
  • نازل تاندیش، اینسرت زیرکنیایی

Tundish Nozzle

The number of melting sequences is important in choosing a Tundish nozzle. Different nozzles for single use Melting or multiple melts are produced and used. It seems necessary to use more resistant material to achieve higher sequences. Contact us to choose the right nozzle at the lowest cost.

  • نازل تاندیش، آلومینا کربن، اینسرت زیرکنیایی
  • نازل تاندیش، آلومینا کربن، اینسرت زیرکنیایی

Alumina-carbon Tundish Nozzle with zirconia insert

Alumina-carbon nozzle with zirconia insert is usually used in medium tundish. Due to its shape and design, this nozzle shows high accuracy and safety factor in casting. This nozzle is assembled through the mortar inside the wellblock.

  • High reliability

  • Use of zirconia insert

  • High dimensional accuracy

  • High resistance to wear and corrosion

Zirconia insert

Using zirconia insert with high density and proper purity as well as high dimensional accuracy is one of the characteristics. are important factors in determining the performance of Tundish nozzles. Also, the way the zirconia insert is installed in the body of the nozzle is one of the important and determining indicators in the safety of using the nozzle.

Assembled Tundish nozzle

Due to the shape of the body, there is no need to use a well block in this type of nozzle. The insert of this nozzle is produced with different amounts of zirconia, which makes it possible to use it for single-melting and multi-melting applications.

  • Ease of installation and use

  • Diversity in base material according to working conditions

  • High dimensional accuracy

  • نازل تاندیش، آلومینا کربن، ریخته گری پیوسته، آلومینا زیر کونیا، آلومینایی

.

  • continues casting، اینسرت زیرکنیایی، آلومینا-کربن

High sequence Tundish Nozzle

The high sequence nozzle is suitable for melting conditions in the number of times and with working hours of more than 6 hours. The strength and thermal resistance of the body as well as the stability and dimensional accuracy of the insert are among the features of this nozzle, which makes it possible to use it for heavy and semi-heavy units.

  • High thermal resistance

  • High temperature wear and corrosion resistance

  • Dimensional stability and maintenance of melt flow

  • Optimal dimensional accuracy

  • Proper connection of insert and body under harsh working conditions